Forum Post: RE: [MSCE] How to avoid the view rotation fly out of the element?
I will try to report. Was not aware that GO doesn't help in such cases so this concept of GO seems outdated and applies only to v7 DGN. But Project Design should really consider using coordinate...
View ArticleForum Post: RAM_Base plate stiffeners
Dear, Is it possible to have different stiffeners layout than this one:
View ArticleForum Post: RE: RAM_Base plate stiffeners
As of now no. We have some plans to enhance base plate design with respect to stiffeners in future.
View ArticleForum Post: Unable to view the Plate stress summary in SFA for different load...
Hi, In SFA, we are unable to view the Plate stress summary for different load cases. when i change the load case the plate stress are remains the same value. Regards Magesh S
View ArticleForum Post: RE: Colortable vs custom line style V8i/CE
One has "Future consideration" status and the other "Planned ". Oddly this does not seem to be related to the amount of votes...at all. So even though slow, there is some movement. Keep hope my...
View ArticleForum Post: RE: Colortable vs custom line style V8i/CE
[quote userid="8959" url="~/products/microstation/f/microstation-forum/258186/colortable-vs-custom-line-style-v8i-ce/808127"]Oddly this does not seem to be related to the amount of votes...at...
View ArticleForum Post: RE: Fix lateral movement in 3D Dynamic Analysis using vertical...
Dear Francesco, The typical method to fix the boundaries is to set the dynamic boundaries for xmin, xmax, ymin and ymax to "none" and then set the static boundary conditions to "horizontally fixed"....
View ArticleForum Post: RE: [MSCE] How to avoid the view rotation fly out of the element?
[quote userid="297179" url="~/products/microstation/f/microstation-forum/258036/msce-how-to-avoid-the-view-rotation-fly-out-of-the-element/808089"]Looks like Mstn's display system has some big problems...
View ArticleForum Post: RAM Frame vs RAM Steel Beam
I've developed a model where all my main girders are composite and also are acting laterally for drag struts; however, from what I can tell, the gravity results from RAM Frame are acting as though the...
View ArticleForum Post: RE: Fix lateral movement in 3D Dynamic Analysis using vertical...
Hello Dennis, Thanks for your suggestion. My concern with setting dynamic boundaries to "none" is that spurious diagonally propagating waves would be reflected back into the model and not absorbed by a...
View ArticleForum Post: RE: Fix lateral movement in 3D Dynamic Analysis using vertical...
Dear Francesco, Unfortunately those 2 are mutually exclusive. Absorbent boundaries (either free field or viscous) must be able to move to be absorbent. Hence, fixed boundaries cannot be absorbent. So...
View ArticleForum Post: RE: Unable to view the Plate stress summary in SFA for different...
Can you please attach the model?
View ArticleForum Post: RE: [ORD 2023 C#] Create event point list
Just wanted to post a status on this, Bentley confirmed that I cannot create an Event Point List programmatically. They feature will be added to the feature request system.
View ArticleForum Post: RE: [ORD 2023 C#] Get LinearEntity2DInPlan from Alignment object
Just wanted to post a status on this, Bentley confirmed that I cannot create an Event Point List programmatically. They feature will be added to the feature request system.
View ArticleForum Post: RE: Colortable vs custom line style V8i/CE
I try to go through the ideas every couple of months. I vote, but I don't expect anything to happen. Some of these things have been issues for decades
View ArticleForum Post: RE: Fix lateral movement in 3D Dynamic Analysis using vertical...
Agree - I will try your approach and will report here. Thanks again. F
View ArticleWiki Page: Timestamp Configuration
Overview Timestamps represent the date and time of an event and can be represented in different formats. This article will provide additional information to assist the user with timestamp configuration...
View ArticleForum Post: RE: [ORD 2023 C#] Create event point list
Try KeyStationListEntity keyStationListEntity = null; keyStationListEntity.AddKeyStation(point.X, point.Y, description, Bentley.CifNET.GeometryModel.KeyStationPoint.KeyStationMethod.NorthingEasting);...
View ArticleForum Post: RE: Valid Plaxis 2D Ultimate entitlement
Dear Faseel Sir, I hope this message finds you well. I am currently encountering difficulties while attempting to install Plaxis 2D. Every time I initiate the installation process, an error code...
View ArticleForum Post: Adjust text on analysis report?
Thanks Carlos, Are there any controls for the print type and size on an analysis export? The text for the diagrams is pixelated and harder to read.
View Article