Forum Post: READ FIRST: MicroStation Printing Forum best practices

To let others know the MicroStation release you are using without having to open the thread, please start the subject of your topic/thread with the following:

[<release>]

where <release> is:

For example, if your printing inquiry is regarding MicroStation V8i, your topic/thread should start with:

[V8i]...

If your printing inquiry is regarding MicroStation V8 XM Edition, your topic/thread should start with:

[XM]...

Also, if the issue you are encountering is specific to a product version or OS or computer, please include the following in your post:

• The version (i.e. v##.##.##.##) of the Bentley product(s) you are using -- you can get this through Help > About... or entering VER in Utilities > Key-in
• The operating system (including service packs) that you are using on your workstation -- you can get that information through Windows Control Panel > System
• The basic hardware configuration for the workstation you are using (e.g. CPU, RAM, graphics card, etc.)
• The type of device you are outputting to.