Hello Giangvn,
AutoPIPE provides over 30+ material libraries with the most popular materials added to each code specific library. If your material is not available in the current library, select NS (non standard) and manually update the information as required on both the pipe properties dialog screen and the Press/Temp/PipeID tab of the input grid. Please see the following to add a material to an AutoPIPE library:
This information can be found with Bentley's Knowledge Search utility:
__1. Go to the Bentley web site (www.bentley.com)
__2. Select "Support and Services" from the top ribbon
__3. Select "Support" hyper link
__4. In the multi colored blue/green grid, under Support Tools heading, select "KnowledgeBase" hyperlink
__5. Log into the Bentley website. (call Bentley if you have troubles logging into the website)
__6. Enter the following into the "Search Text" field; "71134" and press "Search" button.
__7. The first 100 hits will be displayed.
__8. Review the results and select the hyperlink labeled "AutoPIPE: Add a new material v9.0 & up".
Note: using the "Advanced search" hyper link can yield more specific results (exact phrase, limited to a product name, etc..)
The new version of AutoPIPE V8i 9.5 has a new piping code for non-metallic piping (ISO 14692 FRP Piping Code (2005 Addenda)), with improve options to enter FRP pipe properties. Bentley cannot provide specific material data outside that referenced by a code. Suggest contact the manufacture for the data required to add a new material to an AutoPIPE material library.
Regards,
Mike Dattilio
===================================================