Forum Post: RE: Design of Stainless steel structure according to EUROCODE
1) An enhancement request #538081 was created. The product management team will consider the possibility to implement this code in the upcoming STAAD.Pro versions. 2) You can run the code checks as per...
View ArticleWiki Page: How to Show Both Single and Double Pipe Lines in OpenPlant...
Applies To Product(s): OpenPlant Orthographics Manager Version(s): 08.11.11.87 (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Drawing Generation Subarea: Original Author: Faisal Khan, Bentley...
View ArticleWiki Page: History of MicroStation
PseudoStation, MicroStation, and the Origins of Bentley Systems Bentley System's first product was PseudoStation, which allowed users of Intergraph's VAX systems to use low-cost graphics terminals to...
View ArticleWiki Page: INSIDE MicroStation book
Introduction Inside MicroStation is one of the first introductory user guides published by a third party to enter the book market. Published in 1989, it has gone on to sell more than 50,000 copies over...
View ArticleWiki Page: Microstation (SELECT Series 3) Update 1 (08.11.09.357) - Issue...
Applies To Product(s): MicroStation Version(s): 08.11.09.357 Environment: N/A Area: N/A Subarea: N/A Original Author: Aleksander Puszczewicz, Bentley Technical Support Group Also available in: español...
View ArticleWiki Page: MicroStation Known Issues [FAQ]
Applies To Product(s): MicroStation Version(s): All Environment: N/A Area: N/A Subarea: N/A Original Author: Bentley Technical Support Group Unable to save/open errors when opening files from a shared...
View ArticleForum Post: RE: When placing a slip-on flange and using a field-fit weld...
Hello Steven, I am able to reproduce this issue. Please allow some time to investigate the matter. Will get back to you soon. -Regards | Rahul Kumar
View ArticleWiki Page: Unleashing The Power Of The Desktop Within MicroStation V8.5 [CS]
This Client Server article is republished in its entirety from 2004 for reference purposes. It was written for MicroStation v8.5 and may not apply to any other version. By Melissa Hook, Technical...
View ArticleWiki Page: Windows clipboard doesn't work
Applies To Product(s): MicroStation Version(s): All versions Environment: N/A Area: DGN Subarea: General Original Author: Sebastien Cote, Bentley Technical Support Group Problem Description Cut and...
View ArticleWiki Page: Working Units [FAQ]
Document Information Document Type: FAQ Product(s): MicroStation V8 Version(s): All Original Author: Bentley Technical Support Group Legacy Document Number: 6206 What is a unit? A unit is a definition...
View ArticleWiki Page: General - DGN - MicroStation
Cannot Copy/Cut and Paste Design History now shows duplicate entries, one for the old file and one for the new Element Numbers And Types Element will not move or scale General MicroStation Info...
View ArticleWiki Page: How to Show All Pipelines as Single Pipelines in OpenPlant...
Applies To Product(s): OpenPlant Orthographics Manager Version(s): 08.11.11.87 (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Drawing Generation Subarea: Settings Original Author: Faisal Khan,...
View ArticleWiki Page: Open file read-only permanently active
Applies To Product(s): MicroStation Version(s): N\A Environment: N\A Area: DGN Subarea: Open Original Author: Jutta Eisenhauer, Bentley Technical Support Group Problem Open file read-only is...
View ArticleForum Post: RE: Wind load on SP 20.13330.2011
Please find the attached Word document which you may find useful to understand how STAAD applies a wind load as per Russian codes. (Please visit the site to view this file)
View ArticleWiki Page: Open - DGN - MicroStation
_Whats New_.dgn crashes during open Edit V7 DGN files with newer versions Exception with code 0xc0000005 File doesn't open with chosen program Getting ssvagent.exe prompt opening file Grey Screen when...
View ArticleWiki Page: Darstellung von speedikon Linienarten
Produkt(e): Bentley speedikon Architectural Version(en): 08.11.12.09 Umgebung: N\A Produktbereich: Konfiguration Produktunterbereich: Arbeitsbereich Hintergrundinformation In speedikon können einige...
View ArticleWiki Page: Badly shaped plate element
Question: Error message in output file: “Plate No. …is badly shaped, warped, not convex, or not numbered counter-clockwise.” Explanation : There are several rules that need to be observed when modeling...
View ArticleForum Post: RE: Stainless Steel Design
Please follow the the same discussion thread where your query has been answered.
View ArticleWiki Page: Video: Adding additional survey data to fieldbook while...
Product(s): InRoads, MX, GEOPAK Version(s): 08.11.09+ Area: Survey This video demonstrates how to make edits to a terrain model, then add additional survey data to a fieldbook. Click the video below to...
View ArticleForum Post: RE: Best Practices for adding survey data to an existing surface?
Check out this video that shows adding fieldbook data after terrain model edits have been made:
View Article